Open navigation

DT18/DT26X Pitot Tube fixation

When assembling the UAV, operators must pay attention to a correct and firm connection of the pitot tube. A traction of at least 200g can be applied on the tube without any loosening.

A light protocol presented below will help you ensuring a proper connection, please read it entirely and carefully before proceeding:

- Connect the pitot tube to the right wing alone

- By pulling the pitot tube, lift both the pitot tube and the right wing together

- If the wing stays connected to the pitot tube, then everything is correct

- If the right wing falls and is disconnected from the pitot tube, operator should use another pitot tube and contact Delair-Tech hotline.


Please find attached the related information letter.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.