Open navigation

UX11 Association

To enter the maintenance mode and allow UAV association please proceed as follow : 

- Initial state : UAV, battery not connected

Note : Press firmly the buttons and pay particular attention from step 3 to keep both buttons pressed. 

  1. connect the battery : the POWER led will go to a fixed red status
  2. press the check button (and keep it pressed)
  3. press the power button for at least 4 seconds, the POWER led will got to a blinking green state (you can now release the power button)
  4. keep the check button pressed until the 4 leds are in a blinking green state

You are now in maintenance mode and a Wifi network UX11XYZXYZ_M will appear.

Please contact Delair Support via portal if you still have troubles to enter maintenance mode. 

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.